Switching from Speed Plan to TP-Link DS-P7001 Series

Important

Please note that the PON port of the OLT must have the Auto mode disabled. If you have any doubts about this, you can consult the following manual; Configure PON Port

Note

For this example, we will use an Authorized ONU that initially has a 100 Mbps Plan, in this case, we will change it to a 25 Mbps Plan.

1 Go to ONU > List of Authorized ONU's and select the ONU you will be working with.

2 Select the new Speed Plan

Information

It is important that you have previously added the Speed Plan in the System > Speed Plans section.
You can follow the steps in the following section Create Internet Plan

3 Verify that the changes have been applied correctly.

Note

If you need to further check if the change has been applied to the ONU, you can consult the following site SpeedTest, remember that we must be connected to the ONU when measuring the speed. Example of the result:

April 12, 2024, 3:32 p.m. - Visitas: 3766