WAN IP Configuration VSOL Single PON (AdminOLT) - adminolt.com

WAN IP Configuration VSOL Single PON (AdminOLT)

```html

 Information

In some ONU's the WAN IP may not be created correctly, this happens because certain models of ONU's do not support the recommended configuration by the OLT. In case this situation occurs, AdminOLT will create the WAN IP through a different configuration (The service type may result in TR069). Below is a table with the models tested for this update.

OLT VSOL, V2.1.3R

ONU Model STATIC DHCP PPPoE Recommended Configuration Configuration in case of failure
Huawei HG8546M Failed Failed Failed Not supported Failed
Huawei HG8326R Failed Failed Failed Not supported Failed
ZTE ZXHN F668 Successful Successful Failed Not supported Supported
Wolck WK-3800CW Successful Successful Failed Supported ------------------------------
CDATA FD702XW-X-R410 Successful Successful Failed Not supported Supported

 

AdminOLT has integrated a feature to add WAN IP configurations more quickly and efficiently. By following the steps below, you will be able to find out how to set up your WAN IPs and add them to the AdminOLT system.

Questions

Where to create WAN IP configurations in AdminOLT?

Steps to create Wan IP from authorized Onu's.

1Go to the ONU > Authorized section and select the ONU you want to work with, then check the Onu Details.

 Information

For this process, it is recommended that the ONU you are working with is reset and authorized in AdminOLT. If you are unsure how to do this last action, you can follow the instructions in the Authorize ONU manual.

2 Go to the Tools > WAN IP section.

3 List of WAN IP configurations.

There are 3 types of Wan IPs that you can create which can be found in the following sections.

Steps to create Wan IP from unauthorized Onu's.

1 Go to ONU > Unauthorized and select the ONU you will be working with.

2 Select the option Create WAN IP and fill out the form, with this process you will be able to authorize and create a WAN IP for an ONU simultaneously.

 Information

The fields Type, Connection Name, VLAN, Service Type, and Priority will always be present when creating WAN IP configurations of any type.

 ONU Interface

Please note that if you want to check the WAN IP configuration directly on the ONU interfaces, you must connect to their networks to access the interface either through Ethernet or WIFI connection.

How to create a STATIC type WAN IP configuration?

1 Fill out the form.

  • 1.-Type: In AdminOLT, you can create STATIC, DHCP, or PPPoE type WAN IP configurations. In this example, we will create a STATIC WAN IP.
  • 2.-Connection Name: Enter a name of your choice for your configuration.
  • 3.-Associate Ports: Associate the LAN ports of the ONU.
  • 4.-Associate SSID: Associate the SSIDs of the ONU.
  • 5.-Enable HTTP Port: Not functional at the moment.
  • 6.-VLAN: Select an option from a set of available VLANs.
  • 7.-Priority: Define the priority you assign to your WAN IP in a range from 1 to 7.
  • 8.-WAN Mode: The WAN mode can be ROUTE or BRIDGE.
  • 9.-Service Type: The service type will be INTERNET.
  • 10-IP Address: Enter the IP address.
  • 11.-Subnet Mask: Enter the subnet mask.
  • 12.-Gateway: Enter the gateway.
  • 13.-Primary DNS: Enter the primary DNS.
  • 14.-Secondary DNS: Enter the secondary DNS.

When accessing the ONU interface, you will see that the WAN configuration has been created.

How to create a DHCP type WAN IP configuration?

 DHCP Server

It is necessary to have a DHCP server ready. In this example, we will use a server on a MikroTik device.

1 Fill out the form.

  • 1.-Type: In AdminOLT, you can create STATIC, DHCP, or PPPoE type WAN IP configurations. In this example, we will create a DHCP WAN IP.
  • 2.-Connection Name: Enter a name of your choice for your configuration.
  • 3.-Associate Ports: Associate the LAN ports of the ONU.
  • 4.-Associate SSID: Associate the SSIDs of the ONU.
  • 5.-Enable HTTP Port: Not functional at the moment.
  • 6.-VLAN: Select an option from a set of available VLANs.
  • 7.-Priority: Define the priority you assign to your WAN IP in a range from 1 to 7.
  • 8.-WAN Mode: The WAN mode can be ROUTE or BRIDGE.
  • 9.-Service Type: The service type will be INTERNET.

When accessing the ONU interface, you will see that the WAN configuration has been created.

How to edit a WAN IP configuration?

1 Go to the WAN IP List of the ONU.

Then modify the information as needed.

How to delete a WAN IP configuration?

1 Go to the WAN IP List of the ONU.

To confirm the action, press the button labeled Yes, I'm sure.

By doing this, the configuration will be deleted from the ONU and from the AdminOLT system.

 

```

April 12, 2024, 3:32 p.m. - Visitas: 3694