Enable UPlink port HSGQ

1 In the OLT List, we select the equipment we will work with and then go to Uplink Ports, which is located in the button labeled Tools.

2 In the Uplink Ports List, we select the port we will work with and then go to Assign/Remove Vlan, which is located in the button labeled Tools.

3 Assign the VLAN that is convenient to establish the connection.

Note

You can write a description and choose between assigning or removing the VLAN

For our example and following our initial diagram this time, we will use VLAN 900

4 Verify that the changes have been applied correctly.

Next Step

We must apply certain configurations on our PON port so that our clients have internet, you can read the following manual Configure PON Port HSGQ

April 12, 2024, 3:32 p.m. - Visitas: 3473