First Steps - adminolt.com

First Steps

Scenario 1: I have an OLT functioning with clients and I authorize my ONUs using the Auto or Adaptive method.

If your OLT is already functioning, follow these steps.

OLT C-Data functionality flow in Auto or Adaptive mode with AdminOLT.

For this scenario, every time the OLT authorizes a new ONU, you must import it into the system.

1 Add OLT in AdminOLT. See manual here

1.1 Paste connection script (optional) for remote access. See manual here

2 Apply initial configuration. See manual here

3 Import ONUs from the OLT. See manual here

4 View Authorized ONU. See manual here

Scenario 2: I have an OLT functioning with clients and I authorize my ONUs using the Manual method.

1 Add OLT in AdminOLT. See manual here

1.1 Paste connection script (optional) for remote access. See manual here

2 Apply initial configuration. See manual here

3 Authorize ONU. See manual here

4 View Authorized ONU. See manual here

5 Import ONUs from the OLT. See manual here

Scenario 3: My OLT is new and I want to connect it to AdminOLT.

Configuration in MikroTik RouterBoard for TP-Link OLT

It is necessary to have the necessary configurations to connect your OLT with AdminOLT, you can follow the steps in the manual Configuration in MikroTik RouterBoard for OLT C-Data

1 Access the OLT and create accesses. See manual here

2 Add OLT in AdminOLT. See manual here

3 Connection script for remote access. See manual here

4 Apply initial configuration in AdminOLT. See manual here

5 Configure PON Port. See manual here

6 Create VLAN in the OLT. See manual here

7 Assign VLAN to the UPLINK port. See manual here

8 Authorize ONU. See manual here

9 View Authorized ONU. See manual here

10 Configure WAN. See manual here

April 12, 2024, 3:32 p.m. - Visitas: 6962