First Steps - adminolt.com

First Steps

Scenario 1: I have an OLT working with clients and I authorize my ONUs with the NoAuth method.

If your OLT is already up and running, follow these steps.

 Operation flow of Fiberhome OLT in NoAuth mode with AdminOLT.

For this scenario, every time the OLT authorizes a new ONU, you must import it into the system.

1Add OLT in AdminOLT. See manual here

  • 1.1.- Paste Connection Script (optional) for remote access. See manual here

2Apply initial configuration. See manual here

3Import ONUs from the OLT. See manual here

4View Authorized ONU. See manual here

Scenario 2: I have an OLT working with clients and I authorize my ONUs with the Manual method.

1Add OLT in AdminOLT. See manual here

  • 1.1.- Paste Connection Script (optional) for remote access. See manual here

2Apply initial configuration. See manual here

3Authorize ONU. See manual here

4View Authorized ONU. See manual here

5Import ONUs from the OLT. See manual here

Scenario 3: My OLT is new and I want to connect it to AdminOLT.

 Configuration in MikroTik RouterBoard for Fiberhome OLT

You need to have the necessary settings to connect your OLT with AdminOLT, you can follow the steps in the manual Configuration in MikroTik RouterBoard for Fiberhome OLT

1 Enter the OLT and create accesses. See manual here

2 Add OLT in AdminOLT. See manual here

3 Connection Script for remote access. See manual here

4 Apply initial configuration in AdminOLT. See manual here

5 Configure PON Port. See manual here

6 Create VLAN in the OLT. See manual here

7 Assign VLAN to UPLINK port. See manual here

8 Authorize ONU. See manual here

9 View Authorized ONU. See manual here

10 Configure WAN. See manual here

April 12, 2024, 3:32 p.m. - Visitas: 4335