Initial OLT Configuration - TP-Link DS-P7001 Series

Note

The following steps are for a new OLT TP-LINK DS-P7001 Series or one that has been restored to factory settings.

To have a clearer understanding of how the OLT connection is structured when performing the configuration, you can refer to the following diagram on how to make the physical connection.

Steps to Configure New OLT

Access Data

Username: admin
Password: admin

1 We must ensure that we have internet access

2 We must have our Vlan, Administration LAN, and Customer Segment LAN added. For more information, you can read the manual Configuration on RouterBoard MikroTik for OLT TP-LINK DS-P7001 Series

3 We must test the connection with the OLT with the default assigned IP

4 Connect our computer to the router's network and ping from our terminal

5 Access the OLT's graphical interface

6 Configure the new IP for the OLT

We must re-enter but with the new IP

7 Create a user in the OLT, which will be used to connect to AdminOLT

Next Step

Now you can add it to AdminOLT, you can follow the manual steps Add OLT TP-LINK DS-P7001 Series

April 12, 2024, 3:32 p.m. - Visitas: 7277