Port Forwarding for TP-Link DS-P7001 Series

1 To establish the connection successfully, it is necessary to generate a script. To generate it, we go to our OLT and select the edit option.

Once in the editing section, we go to the "Connection Script" tab.

2 Here we will enter our private IP and select the Generate Script option. We will then see that a Script is provided to us.

Private IP OLT

You must enter the private IP of the OLT, for this example, the RB must be able to ping the OLT.

3 This should be entered into our router using Winbox on your MikroTik router.

4 After copying the Script, we must go back to the "Details" tab and select the "Save and Check Connection" option.

You will see a loading screen where you will see the statuses of the connections such as SSH, PON port, etc.

When finished you will be able to see the status of the different established connections.

Note

When checking the connection, the SNMP service may take up to 10 minutes to communicate with AdminOLT. If this is your case, please check the connection after that time.

Note

Next step is to apply initial configurations Apply Initial Configuration TP-Link DS-P7001 Series

April 12, 2024, 3:32 p.m. - Visitas: 4874